RM Transmission EP 75W90

Previously known as

RoadMaster Transmission EP 75W90 is a highly shear stable multi-grade gear oil with modified load carrying additives to allow synchromesh cones to function effectively, resulting in smoother gear changes, and eliminating baulking. Use in manual gearboxes and differentials where a GL5 oil of SAE75W, 80W or 90 viscosity is specified. Especially beneficial for gear changing quality in 4 wheel drive vehicles, European and Japanese trucks.

Available sizes

5L, 20L, 60L, 200L & IBC=1000L

Add to My Library
Add to My Library

The formulation used for RM Transmission EP 75W90 was developed in Europe to overcome gearshift problems and is approved by most of the major European automotive manufacturers.

  • European and Japanese vehicles with synchromesh gearboxes.
  • Differentials where SAE 90, GL5 is specified. 
  • A Total Driveline Lubricant.

  • API GL5
  • US Military
  • MIL-PRF-2105E
  • Mack GO-J
  • MAN 341 GA1, MAN 341Z2

75W90

5L = 1315005, 20L = 1315020, 60L = 1315060, 200L = 1315200, IBC = 1315000

testimonials

What Our Customers Say About Our Products and Services

Dickinson Haulage

Two generations of the Dickinson family have operated their transport company and they have run all their trucks on Anglomoil Lubricants – “Our trucks average 1,300,000 kilometres before we turn them over and there was one truck we bought which clocked up nearly 2,000,000 kilometres. Anglomoil suits all of our engines. We don’t use up oil and they all run very efficiently.

Quantum Air Compressors

To put it quite simply, since we changed to Anglomoil’s food grade, synthetic and mineral grade compressor oils, we don’t have any more dramas. Our compressors operate at the right temperature, they don’t coke up and they are serviced at the right intervals.

Toucan Industrial

We service a wide range of companies across regional New South Wales in mining, quarrying, timber logging, food manufacturing and other industries. The common result we see in all of them is that Anglomoil lubricants have substantially reduced their operating costs. Some of the savings are as much as 75% which is unheard of in these industries. This is because Anglomoil’s synthetic gear oils, engine and transmission oils, hydraulic lubricants, greases and other products are far superior to the rest.

Palm Trans

When we changed over to Anglomoil we ran many, many tests on our fleet. We conducted extensive oil sampling to confirm the benefits we were getting from the Anglomoil products. We noticed the engines ran a lot cleaner, there was less sludging, we were able to extend our drain intervals which also meant the trucks spent less time in our workshop being serviced. The best way to make money in this industry is to keep your trucks on the road.

MP Schulz Excavations

We have been relying on Anglomoil products for more than two decades. Our fleet includes 14 7-20 tonne excavators, tippers and a Caterpillar loader. When we hire our equipment out we know that they tend to push it past its limits. It’s very tough out there on machinery with the heat, the dust, all kinds of weather. We send oil samples from our Caterpillar equipment to them for analysis and in all these years we haven’t had a single issue with the oil breaking down or not performing. Other than routine maintenance we don’t have to touch our equipment.

Abafone Excavating and Earthmoving

We began using Anglomoil diesel engine oils and hydraulic oils almost 25 years ago. I was not willing to take any risks with our investment which includes Volvo and Komatsu excavators, Caterpillar bulldozers, loaders, a roller and grader-scraper. They are usually hired out to contracted operators who ‘use and abuse’ them. With the Anglomoil products there’s no problem in achieving a lifespan up to 30,000 hours with our machinery. Anglomoil hasn’t let us down once.

Previously Viewed Products